Garage Door Installation

by Build Your Own Home · 4 comments

in Garage

Garage Door Installation

Install garage doors on houses with attached garages after sheetrock is complete. Jobs with detached garages should get garage doors after shingles. The material for this work should be provided by the installation contractor.

The garage door contractor installs the door track, places the door panels in the tracks and bolts them together, installs the springs and restraining rope, adjusts the tension in the springs, adjusts the locks so the door can be properly secured, and installs trim at the sides and top of door.

garage door opener installation

Post Garage Door Installation Checklist

  • Check for proper product design (reference your architectural plans, and confirm what was drawn and ordered is what was installed)
  • Check top of door is level with horizontal 2×8 trimmer and plumb with vertical 2×8 trimmers.
  • Check trim moulding has been installed properly. Parallel with sides of door(s) and plumb.
  • Check for correct keys supplied by the contractor. Ensure keys are secured with the house file.
  • Check door lock for ease of use, and locks are of the type not requiring a key to lock and unlock from the inside.
  • Check door(s) opens and closes properly
  • Check for proper tension on springs
  • Confirm that tracks are properly secured to framing members.
  • Make sure that their is no sheetrock damage done by the contractor
  • Check that the garage has been cleaned and all scrap materials remaining have been cleaned up by the contractor

Additional Garage Door Resources

Clopay Doors

Wayne Dalton

Please contact me if you would be interested in your quality garage door installation resource being added to this page.

{ 4 comments… read them below or add one }

Joseph September 5, 2011 at 4:42 am

Yes it has to do with architecture look here:

and much more to be found.

Chloe Taylor September 7, 2011 at 9:41 pm

Composite Custom Garage Doors – A Better Choice: Human beings usually do not consider the standards

Preston Dorman September 8, 2011 at 2:47 am

Missouri, Washington, Alabama

wampum15 September 8, 2011 at 3:00 am

liking "a". The insulation also acts as foundation for the siding. not used so much for the "r" value as it is negligible anyway. The Tyvek acts as a vapor/moisture barrier which reduces the chance of mold.

Leave a Comment

Previous post:

Next post: